1. Manuals
  2. Brands
  3. artisan Manuals
  4. Control Unit
  5. EADS Talon SR122
  6. Reference manual

artisan EADS Talon SR122 Reference Manual

8-channel rs-485 differential stimulus/response module
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
artisan EADS Talon SR122 Reference Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EADS Talon SR122 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for artisan EADS Talon SR122

Summary of Contents for artisan EADS Talon SR122

  • Page 1 Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment SERVICE CENTER REPAIRS WE BUY USED EQUIPMENT • FAST SHIPPING AND DELIVERY Experienced engineers and technicians on staff Sell your excess, underutilized, and idle used equipment at our full-service, in-house repair center We also offer credit for buy-backs and trade-ins •...
  • Page 2 REFERENCE MANUAL Talon Instruments™ SR122 8-Channel RS-485 Differential Stimulus/Response Module Publication Date: 04/24/06 Publication Number: SRMM915 Rev. A Instrument Part Number: SR122 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 3 2. Product model number 3. Your company and contact information You may contact Customer Support by: E-Mail: Helpdesk@eads-nadefense.com Telephone: +1 800 722 3262 (USA) Fax: +1 949 859 7139 (USA) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 4 Buyer shall indemnify and hold EADS North America Test and Services, its officers, employees, subsidiaries, affiliates and distributors harmless against all claims arising out of a claim for personal injury or death associated with such unintended use. Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 5 If the instrument: fails to operate satisfactorily shows visible damage has been stored under unfavorable conditions has sustained stress Do not operate until performance is checked by qualified personnel. Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 6 DOCUMENT CHANGE HISTORY Revision Date Description of Change 06/12/2009 Document Control release Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 7 This page was intentionally left blank. Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 8: Table Of Contents

    4.1.6.1 Output Data Format Timing......... . 4-7 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 9 Appendix D Block Diagram ............D-1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 10 Figure 4-24 SR122 Driver/Receiver Configuration ........4-26 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 11 Table 5-1 Stimulus Memory Data To Front Panel Mapping ....... 5-1 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 12: Introduction

    Hardware register description. C. Programming Examples SR192 stimulus/response examples using the SR122. D. SR192 Clock Timing SR192 clock timing specifications. E. SR122 Block Diagram SR192/SR122 system block diagram. Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 13 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 14: Specifications

    Appendix D of this manual gives the timing relationship be- tween the external input clocks (EXCLK1 and EXCLK2), TS_CLK and external output clocks (CLOCKA and CLOCKB). Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 15: Environmental

    Storage ..........................Sea level to 40,000 ft. Relative Humidity (non condensing) C to +10 C ............................not controlled C to +30 C............................95+/-5%RH C to +40 C............................75+/-5%RH C to +50 C............................45+/-5%RH Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 16: Size

    Note 1: The +5V can be supplied from either the VXI chassis or from V+ on the front panel J10 connector, see section 3.2. Table 2-2 SR122 Voltage Requirements Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 17 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 18: Jumpers/Installation

    For Rev. B PCB E17-E21 and E18-E22 installed connects +5V to the front panel. This setting would be used if the VXI chassis +5V power supply cannot provide sufficient power to the SR122’s. Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 19: Installation

    RP1, see figure 3-1. RP1 is a sixteen pin DIP resister package, Bourns part number 4116R-001-121. The resistor pack can be removed or changed by the user. Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 20: Functional Description

    Field Memory Address. This group of signals is generated by the timing module and broadcast to the I/O modules. The FMA selects the stimulus/response memory word. TS_CLK The timing module clock ( EXT_CLK or INT_CLK). Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 21: Stimulus Logic

    Used to select and delay the group enable signal (the group enable can be delayed up to 15ns in 5ns increments). The group enable signal allows the operator to enable all eight drivers for a portion of the timing cycle. Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 22: Enable Select

    For each SR122 I/O module, the CPU must first define the function which is to be performed by the mode logic. The following functions may be selected for each module. Data Format Functions: 1. HOLD Load the present data back into the output register Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 23: Output Mode Logic

    Figure 4-3 Output Mode Logic Block Diagram The following list describes the functional blocks of figure 4-3. REGISTER CONTROL Used to select the data source for the stimulus registers. Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 24: Driver Enable Logic

    • Present Data • The timing module signals STIM_LOAD and TSOUT4 along with the selected function mode control which one of the three data signals is enabled. Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 25: Output Mode Timing

    STIM_LOAD signal is true (”low” state) the data from the stimulus memories is routed to the output registers and will be loaded on the next rising edge of TS_CLK. When the TSOUT4 signal is true (”low” Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 26: Output Mode Timing Examples

    FF becomes 0. Tristate data does not change. TS_CLK Rising Edge Loads function data into the output registers (0 in example). Table 4-3 Output Data Format Timing Description Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 27: Output Algorithmic Increment Function

    30 becomes hex 32. Tristate data does not change. TS_CLK Rising Edge Loads function data into the output registers (Hex 32 in example). Table 4-4 Output Algorithmic Timing Description Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 28: Output Serial Shift Function

    Table 4-5 Output Serial Shift Timing Description NOTE: The serial shift example above has been programmed to output only five bits from each stimulus word instead of all eight. Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 29: Output Multiplex Shift Function

    NOTE: In the above multiplex example the UUT data during T4 and T5 holds its present value (hex 1) because both control signals (TSOUT4 and STIM_LOAD) are false (high). Refer to table 4-2. 4-10 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 30: Response Logic

    Timing Set Strobe 1 from the timing module. TSSTROBE2 Timing Set Strobe 2 from the timing module. Control signals used to program the strobe/group enable selector. Refer to appendix 4-11 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 31: Strobe Select

    Table 4-7 Input/Shift Strobe Functions The strobe select block also allows the operator to delay the input and shift strobe signal up to 5ns in 5ns increments. 4-12 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 32: Address Logic

    0 of the RECORD memory. The mask and expect memories are addressed by the PMA bus. The record memory is addressed by the registered PMA bus called the RMA bus. 4-13 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 33: Input Mode Logic

    The serial shift function records data only from the most significant channel. The serial multiplex function records data from the least significant differen- tial nibble of the channel group. Refer to section 4.1.3. 4-14 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 34: Input Comparator

    The input comparator generates the data that will be recorded in the record memory. It also generates the real time ERROR and COMPARE signals that can be tested by the timing modules. 4-15 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 35: Input Register Control

    If the response data has to be recorded during the next stimulus word, then the expect and mask data must be delayed using addressing mode 2 or 4. 4-16 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 36: Input Mode Timing

    Do not have the rising edge of STIM_LOAD at the same time as the fal- ling edge of SR_CLK. Do not have the falling edge of INPUT STROBE at the same time as the rising edge of STIM_LOAD. 4-17 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 37: Input Mode 2 Timing

    (MASK, EXPECT and RECORD). This is used in applications where the response to a stimulus word cannot be strobed prior to the end of the stimulus word cycle. 4-18 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 38: Figure 4-16 Input Mode 2 Timing

    STIM_LOAD STIMULUS TO UUT ADEL_CLK EXPECT & Expect 1 Expect 0 MASK DATA INPUT STROBE RESPONSE FROM UUT COMPARE ERROR Figure 4-16 Input Mode 2 Timing 4-19 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 39: Input Mode 3 Timing

    Figure 4-18 Input Mode 3 Timing Restrictions Timing Set Restrictions: The INPUT STROBE must occur at least two cells later than STIM_LOAD (in stimulus response applications). 4-20 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 40: Input Mode 4 Timing

    In this mode the bus that addresses the stimulus memory (FMA) is registered by the falling edge of the ADEL_CLK signal before addressing the response memories (MASK, EXPECT and RECORD). 4-21 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 41: Figure 4-20 Input Mode 4 Timing

    STIM_LOAD STIMULUS TO UUT ADEL_CLK EXPECT & Expect 1 Expect 0 MASK DATA INPUT STROBE RESPONSE FROM UUT COMPARE ERROR Figure 4-20 Input Mode 4 Timing 4-22 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 42: Input Mode Timing Examples

    The following example uses input mode 1 timing. 4-23 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 43: Input Multiplex Shift Timing

    The multiplex shift mode allows the operator to input UUT response data as a multiplex stream. The multiplexed input comes from the four least significant differential channel pairs. The shift strobe tempo- 4-24 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 44: Figure 4-23 Multiplex Mode Input Timing Example

    MASK DATA SHIFT STROBE INPUT STROBE RESPONSE Hex 3 Hex 5 Hex 7 Hex 1 FROM UUT (LSN) COMPARE ERROR Figure 4-23 Multiplex Mode Input Timing Example 4-25 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 45: Driver/Receiver Logic Description

    Figure 4-24 below illustrates the SR122’s driver/receiver logic. National DS3695AM DO / RI STIM_Dn DO / RI 120 W ENAB_Dn RESP_Dn Figure 4-24 SR122 Driver/Receiver Configuration 4-26 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 46: Memory Data Mapping

    CH111 CH127 CH143 CH159 CH175 CH191 CH16 CH32 CH48 CH64 CH80 CH96 CH112 CH128 CH144 CH160 CH176 CH192 Table 5-1 Stimulus Memory Data To Front Panel Mapping Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 47 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 48: Appendix A Glossary Of Terms

    Eight bi-directional differential data channels. I/O MODULE Any of Talons Stimulus/Response modules for the SR192. OUTPUT REG Signal used to indicate if the output register mode is enabled or disabled. Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 49 Timing Set Output Two. General purpose output signal generated by the timing module. TSOUT3 Timing Set Output Three. General purpose output signal generated by the timing module. Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 50 A word is a single element of a table. The width of a word depends on the number and type of I/O modules installed in the SR192. Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 51 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 52: Appendix B Function Code Map

    128K x 8 word and byte access. DATA EXPECT CODE FROM ABOVE RECEIVED ‘0’ ‘1’ ‘M’ ‘0’ ‘1’ Read RESPONSE data. 128K x 8 word and byte access. Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 53 FCNTl1 FCNTl2 CSTROBE Always Enabled Never Enabled SELSB1 SELSB0 Selected Shift Strobe TSSTrobe1 TSSTrobe2 FCNTl1 FCNTl2 SELSB4 SELSB3 SELSB2 Selected Input Strobe TSSTrobe1 TSSTrobe2 FCNTl1 FCNTl2 CSTROBE Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 54 ENSHIFT 0 to 1 (non shift to shift) must be programmed from the least significant IO module to the most signifi- cant IO module. ENSHIFT 1 to 0 (shift to non shift) must be programmed Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 55 Each SR192 module has a unique ID so the firmware can auto configure the system on power up. ID FOR SR122 (0x19) MODULE STATUS 1 (NA) COPY OF THE ID WORD COPY OF MODULE STATUS Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 56: Appendix C Sr192 Clock Timing

    Internal Clock to TSB Output Clock Propagation. TS_CLK CLOCKB Programmable measurements were made with VOH set to +5V, VOL set to 0V, VISR set to +2V and VIL set to +2.5V. Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 57 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 58: Appendix D Block Diagram

    Appendix D Block Diagram Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 59 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 60 Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment SERVICE CENTER REPAIRS WE BUY USED EQUIPMENT • FAST SHIPPING AND DELIVERY Experienced engineers and technicians on staff Sell your excess, underutilized, and idle used equipment at our full-service, in-house repair center We also offer credit for buy-backs and trade-ins •...

Table of Contents