Subscribe to Our Youtube Channel
Related Manuals for Schick HZ 90
Summary of Contents for Schick HZ 90
- Page 1 Georg Schick Dental GmbH Lehenkreuzweg 12 D-88433 Schemmerhofen Telefon +49 7356 9500-0 Telefax +49 7356 9500-95 E-Mail info@schick-dental.de Internet www.schick-dental.de Operating Instructions SCHICK - Milling Machine HZ 90...
- Page 2 SCHICK - Milling Machine HZ 90 Index 1. List of contents - accessories 2. Technical data 3. Operating - control unit - milling machine - swivelling model table 4. Change of tools 5. Change of the chuck 6. Change of carbon brushes 1.
-
Page 3: Operation
3. Operation 1. Control unit 1.1 Put connecting cable into sleeve of control unit and into sleeve of milling machine and screw it in. 1.2 Switch on by pushing switch “ON” - switch is illuminated. Only then all the other electrical functions can be operated. To switch the unit off press switch “OFF”... - Page 4 2.4 The milling spindle holder can be fixed in any desired postion by turning knurled knob (13) . At the top side of the milling spindle holder there are two grip sleeves for depth stop and for tension of the spring. The tension of spring can be adjusted in each position between the upper and the lowest fix point.
- Page 5 SCHICK - Milling Machine HZ 90 Dentalgeräte & Dentalinstrumente...
- Page 6 5. Exchange of the chuck 5.1 Open the chuck 5.2 Turn the chuck with the special key with a sharp movement and unscrew it, in the sense of direction sign. 5.3 Screw chuck with the special key in the sense of direction sign until feeling of resistance.
-
Page 7: Declaration Of Conformity
Declaration of Conformity GEORG SCHICK DENTAL GmbH Lehenkreuz 12 88433 Schemmerhofen declare herewith, that the product Milling unit HZ 90 2005 is in conformity with the following provisions of Directive: 92/59/EWG (allgemeine Produktsicherheit) 89/392/EWG (Maschinenrichtlinie) 73/23/EWG (Niederspannungsrichtlinie) According to following standards: EN 60204/1 (Elektrische Ausrüstung von Maschinen)
Need help?
Do you have a question about the HZ 90 and is the answer not in the manual?
Questions and answers