Functional Description; Commissioning; Setup - Festool SYSLITE STL 450 Instruction Manual

6

Functional description

The pictures for the functional descrip-
tion are on a fold-out page at the begin-
ning of the instruction manual. While
reading the manual you can fold out the
page for comparison and quick refer-
ence.
[1-1] On/Off switch
[1-2] Luminous area
[1-3] Power cable
[1-4] Cable holder
7

Commissioning

Unauthorised voltage or frequency!
Risk of accidents

Observe the specifications on the ra-
ting plate.

Observe country-specific regulations.
Electric shock caused by penetrating
moisture.
Physical injury and damage to the
mains plug.

Do not insert the mains plug in the
socket if the surroundings are damp.
WARNING
WARNING
7.1 On/Off switch [1-1]
Switching on

Unwind the power cable from the cable
holder [1-4].

Insert mains plug into socket.

Press the ON/OFF switch [1-1].
Switching off

Press the ON/OFF switch [1-1] again.

Unplug the mains plug.

Wind the power cable onto the cable
holder [1-4].
7.2 Temperature monitoring
When the permissible operating tem-
perature range is not reached/is exceed-
ed, the grazing light switches itself off.
8

Setup

90°
The grazing light has a range of 8-13/64
ft. When this range is exceeded, uneven
surfaces may not be detected.
90°
2
7