Table of Contents
Advertisement
CHAPTER 4: PANELS
In the default setting, the panel can obtain the IP address and DNS servers using your network's DHCP. Under the item "Current IP
settings" you can check whether the assigned addresses correspond with your network. If this setting does not meet your requirements,
you can change it according to the instructions in the IN-SESSION 7" and 12" Room Scheduler - Setup Guide - Common Settings,
IP settings chapter. At this point, you do not need to change the item "Magic name." Its function is also explained in the above mentioned
chapter. Now you can create a new reservation system just by tapping on "Create new system."
Panels connected to the same reservation system share their settings, e.g. if you need to change the user account password, you can
just do it on one panel and all the other ones within the same reservation system will adopt the change automatically. The reservation
system name and password serve for mutual identification of panels. The password is also used for accessing the panels' settings.
At first touch field "Select server type" and select "Office 365".
FIGURE 4-3. CREATE NEW SYSTEM SCREEN
FIGURE 4-4. SELECT OFFICE 365 SERVER SCREEN
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
15
Advertisement
Table of Contents
