About The I.link Port - Sony VAIO VGCRB40 Owner's Manual
Sony vgcrb40 series viao desktop pc owner's manual
Hide thumbs
Also See for VAIO VGCRB40:
- Safety information manual (13 pages) ,
- Specifications (2 pages) ,
- Supplementary manual (1 page)
Table of Contents
Advertisement
About the i.LINK Port
Your VAIO
computer is equipped with a 4-pin and a 6-pin i.LINK
®
connected i.LINK device. A 6-pin i.LINK port can supply power (10V to 12V) to a connected i.LINK device, if the device is
equipped with a 6-pin connector.
The total power supplied by the 6-pin i.LINK port does not exceed 6 watts.
Connecting an i.LINK (IEEE 1394) device
1.
Use the
symbol to locate the i.LINK port on your compatible i.LINK device and on your computer. Plug the i.LINK
cable connector into this port.
2.
Plug the other end of the cable into the corresponding 4- or 6-pin i.LINK port on your computer.
See the instructions supplied with your i.LINK device for more information on installation and use.
port. A 4-pin i.LINK port cannot supply power to a
®
Page 18
Hide quick links:
Advertisement
Table of Contents
