Pioneer VSX-1127-K Service Manual page 7

Hide thumbs Also See for VSX-1127-K:
Table of Contents

Advertisement

5
Miscellaneous
Power requirements.....................................AC 120 V, 60 Hz
Power consumption .....................................................550 W
In standby.................... 0.2 W (HDMI Setup – Control : OFF)
0.3 W (HDMI Setup – Control : ON)
Dimensions....... 435 mm (W) x 168 mm (H) x 362.5 mm (D)
(17 3/16 in. (W) x 6 5/8 in. (H) x 14 5/16 in. (D))
Weight (without package) .................................9.9 kg (22 lb)
Note
• Specifications and the design are subject to possible
modifications without notice, due to improvements.
• This product includes FontAvenue® fonts licensed by NEC
Corporation. FontAvenue is a registered trademark of NEC
Corporation.
VSX-1122-K
Amplifier section
Continuous average power output of 90 watts* per channel,
min., at 8 ohms, from 20 Hz to 20 000 Hz with no more than
0.08 %** total harmonic distortion.
Front (stereo) ................................................... 90 W + 90 W
Power output (1 kHz, 6 Ω, 1 %, 1 ch driven) ...............165 W
Guaranteed speaker impedance ........................ 6 Ω to 16 Ω
* Measured pursuant to the Federal Trade Commission's
Trade Regulation rule on Power Output Claims for Amplifiers
** Measured by Audio Spectrum Analyzer
Audio Section
Input (Sensitivity/Impedance)
LINE.............................................................315 mV/47 kΩ
Signal-to-Noise Ratio (IHF, short circuited, A network)
LINE........................................................................ 100 dB
Signal-to-Noise Ratio [EIA, at 1 W (1 kHz)]
LINE.......................................................................... 81 dB
Tuner Section
Frequency Range (FM) ..................... 87.5 MHz to 108 MHz
Antenna Input (FM)................................... 75 Ω unbalanced
Frequency Range (AM) ...................... 530 kHz to 1700 kHz
Antenna (AM) ...............................Loop antenna (balanced)
Video Section
Signal level
Composite Video ............................................. 1 Vp-p (75 Ω)
Component Video......... Y: 1.0 Vp-p (75 Ω), PB/PR: 0.7 Vp-p
Corresponding maximum resolution
Component Video............ 1080p (1125p) (Video convert off)
Digital In/Out Section
HDMI terminal ............................................. 19-pin (Not DVI)
HDMI output type................................................5 V, 100 mA
USB terminal .......... USB2.0 High Speed (Type A) 5 V, 2.1 A
iPod terminal............................USB, and Video (Composite)
ADAPTER PORT terminal ..................................5 V, 100 mA
WIRELESS LAN ADAPTER terminal .................5 V, 600 mA
5
6
Integrated Control Section
Control (IR) terminal ........................ø 3.5 Mini-jack (MONO)
IR signal................................ High Active (High Level: 2.0 V)
Network Section
LAN terminal................................ 10 BASE-T/100 BASE-TX
Miscellaneous
Power requirements.....................................AC 120 V, 60 Hz
Power consumption .....................................................550 W
In standby.................... 0.2 W (HDMI Setup – Control : OFF)
0.3 W (HDMI Setup – Control : ON)
Dimensions....... 435 mm (W) x 168 mm (H) x 362.5 mm (D)
Weight (without package) .................................9.9 kg (22 lb)
Note
• Specifications and the design are subject to possible
modifications without notice, due to improvements.
• This product includes FontAvenue® fonts licensed by NEC
Corporation. FontAvenue is a registered trademark of NEC
Corporation.
(75 Ω)
VSX-1127-K
6
7
(17 3/16 in. (W) x 6 5/8 in. (H) x 14 5/16 in. (D))
7
8
A
B
C
D
E
F
7
8

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vsx-1122-kVsx-60Vsx-1027-k

Table of Contents