Pioneer VSX-1127-K Service Manual page 50

1
A Precautions
• Files are stored in Root of USB memory.
• Files are read from Root of USB memory.
r To make operations such as moving files, be sure to assign the saved file in Root of the USB memory.
Also please be careful not to assign *.avr in multiple numbers.
• The time and date of updating for saved file is fixed to "2006/03/08 20:01."
• In principle, please implement Load without making of factory default settings.
To Load from factory default settings status, please take caution on the following points;
Please be sure to check the HDMI control setting for the user before performing of factory default settings.
Since the HDMI control setting of default settings is ON, turn OFF the HDMI control setting and Load after performing of
factory default settings if the checked user setting is OFF.
(If Load is executed with the setting ON, the assignment information for each HDMI input will be cleared.)
B
Procedures for turning OFF the HDMI control setting
r HOME MENU r 4.System Setup r e.HDMI Setup r Control OFF
Note:
In case of US models, [USB Backup] function is not implemented with the first firmware.
Before performing the backup function, please check the unit version. If small version number of Main com (EMMA) is
smaller than 157, please update to the latest version.
If that is 157 or over (e.g. [1-157076014091] ), the backup function is implemented.
C
D
E
F
50
1
2
VSX-1127-K
2
3
3
4
4