Setting Up Your Computer With Vaio Control Center - Sony VAIO VGN-A700 Series User Manual

Setting Up Your Computer with VAIO Control Center

The VAIO Control Center utility allows you to consult system information and specify preferences for system behavior.
To use VAIO Control Center
1 Click Start, point to All Programs, and click VAIO Control Center.
The VAIO Control Center window appears.
Control item
System Information
Initial Setting
Built-in Pointing Device
S Button
Plug and Display
*3
Automatic Brightness
Station and Port replicator
*1
Default S1 button assignment
*2
Default S2 button assignment
*3
On selected models only.
Description
Displays the information about your operating system, the hardware configuration, and software information.
You can specify the order in which the system checks for devices containing a bootable system when it starts.
You can enable or disable the built-in pointing device.
You can change the functions assigned to the computer's S buttons. Available pre-defined assignments are as
follows.
For VGN-A700 Series models:
Stand by, Hibernate, External Display, Launch Application, VAIO Zone
For VGN-FS600 Series models:
*1
Muting , Stand by, Hibernate, Max Brightness, External Display
Audio Filter, Multiple Monitors
You can specify settings for automatic output to the external display.
You can specify settings for the auto luminance sensor. The auto luminance sensor senses the brightness from
outside then the display brightness is adjusted accordingly.
You can specify the behavior when station or port replicator is connected to your computer.
Customizing Your VAIO Computer
*1
, Multiple Monitors
*2
, Launch Application, VAIO Zone, SSMS
n N
131