Setting Up Tv Connections - Sony VAIO VGC-LV200 Series User Manual

Setting Up TV Connections

!
The following connections may not be available in some countries or areas.
The best method to connect your computer system, TV monitor or display, and cable service access, depends on the type of
cable connection available in your home.
TV signal reception strength will vary widely depending on service availability in your area as well as the type of connection
available.
One primary cable to connect the computer to a cable service access or a TV antenna is the TV coaxial cable (1). One end
connects to the computer's CABLE/ANT ANALOG input port, and the other end connects to the cable service access or to
the antenna. Only one TV coaxial cable is supplied with models with the TV tuner board.
✍
You need to remove the back panel cover from the computer and the base stand cover from the base stand before setting up the TV connection. See
Removing and Replacing the Covers
Source and Cables (page 25).
(page 20) for the procedure. For information on how to connect cables to the computer, see Connecting a Power
n 61 N
Using Your VAIO Computer