Advertisement
When removing a slot cover, be careful not to damage components on
the system board or add-in cards. You may need to temporarily
remove add-in cards that are next to the slot cover you want to
remove.
Do not place the computer in a location that is subject to vibration
or shock.
Do not move the computer during operation.
Do not subject the computer to sudden changes in temperature.
Do not turn off the power while the computer is accessing the hard
disk drive.
Do not open the shutter manually and touch the surface
of the diskette.
Keep diskettes away from magnets.
Keep diskettes away from direct sunlight and other heat sources.
Do not touch the surface of the disc.
Do not drop or bend the disc.
Fingerprints and dust on the surface of a disc may cause read
errors. Proper care of the disc is essential to maintain its reliability. Do
not use solvents such as benzine, thinner, commercially available
cleaners or anti-static spray, as they may cause damage to the disc.
For normal cleaning, hold the disc by its edge and use a soft cloth
to wipe the surface from the center out.
If the disc is badly soiled, moisten a soft cloth with water, wring it out
well, and use it to wipe the surface of the disc from the center out.
Wipe off any remaining moisture with a dry soft cloth.
Advertisement
