Advertisement
In order to increase your computer's memory, you may need to remove
one of the factory-installed DIMMs and replace it with one of greater
capacity. For details, see the V AIO MicroTower Reference Manual, which is
available at Sony's website at http://www.sony.com/pcsupport.
For memory upgrades, use only 3.3V unbuffered 4-clock 64-bit 66 MHz
SDRAM DIMM module Rev1.0 or 3.3V unbuffered 4-clock 72-bit 66 MHz
SDRAM DIMM module Rev1.0. For more information on MicroTower
compatible memory, call Sony at 1-888-4SONYPC (1-888-476-6972).
Shut down your computer and turn off all peripheral devices, such as
your printer, display, and speakers.
Unplug your computer and any peripheral devices.
Remove the left-side panel, bottom panel, and front panel, as
described on pages 63 to 65. Then detach the diskette drive, as
described on page 66.
If necessary, remove any cables, add-in cards or other components to
access the DIMM sockets.
Remove either (or both) of the factory-installed DIMMs.
Handle the DIMM only by the edges, and remove it from its anti-
static package.
Locate the keys on the bottom edge of the DIMM.
Advertisement
