Warnings - Graco 25C536 Instructions - Parts Manual

Warnings

Warnings Warnings
The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclamation
point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific risks. When these
symbols appear in the body of this manual, refer back to these Warnings. Product-specific hazard symbols and
warnings not covered in this section may appear throughout the body of this manual where applicable.
FIRE AND FIRE FIRE AND EXPLOSION AND
Flammable fumes, such as solvent and paint fumes, in work
solvent flowing through the equipment can cause static sparking. To help prevent fire and explosion:
• Use equipment only in well ventilated area.
• Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and plastic
drop cloths (potential static arc).
• Ground all equipment in the work area. See Grounding
• Never spray or flush solvent at high pressure.
• Keep work area free of debris, including solvent, rags and gasoline.
• Do not plug or unplug power cords, or turn power or light switches on or off when flammable
fumes are present.
• Use only grounded hoses.
• Hold gun firmly to side of grounded pail when triggering into pail. Do not use pail liners unless they
are antistatic or conductive.
• Stop Stop operation Stop operation immediately operation
you identify and correct the problem.
• Keep a working fire extinguisher in the work area.
MOVING PARTS
MOVING MOVING
Moving parts can pinch, cut, or amputate fingers and other body parts.
• Keep clear of moving parts.
• Do not operate equipment with protective guards or covers removed.
• Do not wear loose clothing, jewelry, or long hair while operating equipment.
• Equipment can start without warning. Before checking, moving, or servicing equipment, follow the
Pressure Relief
Pressure Pressure
PRESSURIZED PRESSURIZED EQUIPMENT PRESSURIZED
Fluid from the equipment, leaks, or ruptured components can splash in the eyes or on skin and
cause serious injury.
• Follow the Pressure
checking, or servicing equipment.
• Tighten all fluid connections before operating the equipment.
• Check hoses, tubes, and couplings daily. Replace worn or damaged parts immediately.
3A4797B
EXPLOSION HAZARD EXPLOSION HAZARD HAZARD
immediately if static sparking occurs or you feel a shock, Do not use equipment until immediately
PARTS HAZARD HAZARD
PARTS HAZARD
Relief Procedure Procedure and disconnect all power sources.
Relief Procedure
EQUIPMENT HAZARD EQUIPMENT HAZARD HAZARD
Pressure Pressure Relief Relief Procedure Relief Procedure when you stop spraying/dispensing and before cleaning, Procedure
WARNING
WARNING WARNING
work area
work
Grounding instructions.
Grounding
area can ignite or explode. Paint or
area
Warnings
3