Table of Contents
Advertisement
MS400HD
INSTALLATION PRECAUTIONS
Handle carefully!
Dropping the unit or subjecting it to strong impact or vibration may cause malfunctioning.
●
Power supply
Be sure the power plug is firmly connected at all times.
●
If the unit is not going to be used for a prolonged period of time, be sure to turn off the power and disconnect
●
the unit power plug from the AC outlet.
Do not allow any foreign objects to enter inside the unit!
Allowing water, metal items, scraps of food or other foreign objects inside the unit may cause a fire and/or
●
electric shocks.
Installation Location
This unit is designed for indoor use only.
●
Install the unit on a sufficiently strong, stable and level surface for use.
●
Ensure a space of at least 100 mm (3-15/16˝) around the front vents to avoid obstructing ventilation. In
●
particular, ensure sufficient space between ventilation and wiring when using mounted in a panel or table.
Do not install the unit in a manner in which its cables and other accessories can be easily damaged.
●
Do not install the unit in a cold place where the temperatures will drop below 0 °C (32 °F) or in a hot place
●
where the temperatures will rise above +50 °C (122 °F).
Avoid installing the unit where it will be exposed to direct sunlight or to the hot air that is blown out from other
●
products.
Installing the unit in a very humid, dusty or vibration-prone location may damage internal parts and cause
●
rusting and corroding.
HARDWARE INSTALLATION
1. Connect all displays to HDMI Inputs on the rear panel of MS400HD Matrix Switcher.
2. Connect all sources to HDMI Inputs on the rear panel of MS400HD Matrix Switcher.
3. Connect the +5V 4A DC DC power supply to MS400HD Matrix Switcher.
English
4
Advertisement
Table of Contents
