Ir Remote; Selecting Sources And Outputs By Keypad - A SYSTEMS MS400HD User Manual

MS400HD

IR REMOTE

IR Remote Button Layout

SELECTING SOURCES AND OUTPUTS BY KEYPAD

1 to 1 switch:
1 to all switch:
English
1 to 1 switch:
Step 1: Press A(1) / B(2) / C(3) / D(4) in output block to select one of the output port you
are going to control.
Step 2: Press 1 / 2 / 3 / 4 in input block to select input source which you want to be dis-
played on selected output.
Switch to mirrored connection:
Press NTN , then the routing status will be changed to Input 1 - Output A, Input 2 - Output
B, Input 3 - Output C, Input 4 - Output D.
1 to all switch:
Press ALL , then press / / / in input block to select input source which you want to be
displayed
on all output
Preset routing for scenes:
Press Save , then press 1 / 2 / 3 / 4 in scene block, save current routing status to user
preset memory 1/2/3/4.
Press Load , then press 1 / 2 / 3 / 4 in scene block, load routing status from user preset
memory 1/2/3/4 and apply to current routing.
Step 1: Select output, for example 'B'
- 2 -
Step 2: Select Input, for example '3'
Initial routing status
You will see left indication
on LCD display
Finally, the routing state
of output B is changed to
input 3.
8
Initial routing status