❑
If the above steps fail to "unlock" your computer, try the following steps:
1
Save any unsaved work, if possible.
2
Press Alt+F4.
3
Select Restart.
4
Click OK.
❑
If you cannot restart as described in the preceding steps, you can restart the
computer by pressing Ctrl+Alt+Delete or by pressing the power switch for
more than six seconds.
✍
Pressing Ctrl+Alt+Delete twice consecutively may result in the loss of changes
made to files that are currently open.
❑
Contact the software publisher or designated provider for technical support.
See the contact information in this manual.
Topic: Why does Windows lock up during shutdown?
Topic:
Topic:
Topic:
Why does Windows lock up during shutdown?
Why does Windows lock up during shutdown?
Why does Windows lock up during shutdown?
®
The Windows
operating system may not shut down properly for many reasons,
including incompatible or conflicting drivers, damaged files, or non-responsive
hardware. For troubleshooting information, you can search Windows Help.
1 1 1 1
From the Start menu, select Help.
2 2 2 2
Click the Contents tab.
3 3 3 3
Click Troubleshooting and then click Windows 98 Troubleshooters.
4 4 4 4
Click the subject for which you want information, and then answer the
questions that are appropriate for your problem.
Topic: How do I change the parallel port type to ECP, EPP, or bi-
Topic:
How do I change the parallel port type to ECP, EPP, or bi-
Topic:
Topic:
How do I change the parallel port type to ECP, EPP, or bi-
How do I change the parallel port type to ECP, EPP, or bi-
directional?
directional?
directional?
directional?
You can change the parallel port type using the System Setup utility (CMOS
Setup Utility). To access System Setup:
1 1 1 1
From the Start menu, select Shut Down, and then select Restart.
2 2 2 2
When the Sony screen displays, press the F2 key on your keyboard.
3 3 3 3
Select the Advanced tab from the CMOS Setup Utility screen.
Troubleshooting
35 35 35 35