On Handling A Crt Display; On Using The Hard Disk Drive; On Handling Diskettes - Sony VAIO PCV-J100 User Manual

practices and regulatory compliance required for using and modifying
electronic equipment.
Disconnect the system from its power source and from any


telecommunications links, networks, or modems before you open the system
or follow any of the procedures described in the online document
"Upgrading and Maintaining Your VAIO
result in personal injury or equipment damage.
Electrostatic discharge (ESD) can damage disk drives, add-in cards, and


other components. Follow the procedures described in the online document
"Upgrading and Maintaining Your VAIO
workstation. If such a station is not available, do not work in a carpeted area,
and do not handle materials that produce or hold static electricity
(cellophane wrappers, for example). Ground yourself by maintaining contact
with an unpainted metal portion of the chassis while performing the
procedure.
When removing a slot cover, be careful not to damage components on the


system board or add-in cards. You may need to temporarily remove add-in
cards that are next to the slot cover you want to remove.

On Handling a CRT Display

Do not place the display near a strong magnetic force.


Do not block the ventilation slots on the display.

On Using the Hard Disk Drive

Do not place the computer in a location that is subject to vibration or shock.


Do not move the computer during operation.


Do not subject the computer to sudden changes in temperature.


Do not turn off the power while the computer is accessing the hard disk


drive.

On Handling Diskettes

Do not open the shutter manually and touch the surface of the diskette.


Keep diskettes away from magnets.


Keep diskettes away from direct sunlight and other heat sources.


®
Computer" . Failure to do so may
®
Computer" only at an ESD
Notes on Use
45