Sony ICD VGN-UX200 User Manual page 95

Sony personal computer vgn-ux200 user guide
Table of Contents

Advertisement

Changing the Hard Disk Password
To change the hard disk password
1
Turn on the computer.
2
Press and hold the Fn key and press the F2 key when the VAIO logo appears.
The BIOS setup screen appears. If not, restart the computer, press and hold the Fn key and press F2 key several times
when the VAIO logo appears.
If you have set the power-on password, enter your power-on password.
3
Press the < or , key to select Security to display the Security tab, select Hard Disk Password, and then press the
Enter key.
The password entry screen appears.
4
Select Change Master Password or Change User Password and press the Enter key.
5
Enter the current password once and then a new password twice.
6
Press the Enter key.
7
Press the Enter key when the success message appears.
8
Press the Esc key.
9
Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.
On the Setup Confirmation screen, make sure that Yes is selected and then press the Enter key.
n
Customizing Your VAIO Computer
95
N

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vaio vgn-ux200 series

Table of Contents