Why Can't I Use The Built-In Motion Eye Camera - Sony ICD VGN-UX200 User Manual

Why can't I use the built-in MOTION EYE camera?

The built-in MOTION EYE camera cannot be shared by more than one software application. If another software
application is using the camera, exit the application before using the built-in MOTION EYE camera.
You cannot use the built-in MOTION EYE camera if the screen view is rotated. Restore the standard screen view.
If the problem persists, you must reinstall the driver software for the camera. Follow these steps:
1 Click Start and then Control Panel.
2 Click the Performance and Maintenance icon.
3 Click the System icon.
4 Click Device Manager on the Hardware tab.
5 Double-click Imaging devices.
6 Right-click Sony Visual Communication Camera VGP-VCC3 and click Update Driver.
What should I do if my computer becomes unstable when it enters Standby or Hibernate
mode while the built-in MOTION EYE camera is in use?
Do not place your computer into Standby or Hibernate mode while you are using the built-in MOTION EYE camera.
If your computer automatically enters Standby or Hibernate mode, change the corresponding power saving mode setting.
For changing the setting, see Using the Power Saving Modes (page 118).
n 154 N
Troubleshooting