Sony PEG-NX60 Intellisync Lite Operating Instructions Manual page 17

3
Insert your CLIÉ handheld at an angle in the cradle and lay
it back to fit into place.
The POWER LED indicator of your CLIÉ handheld turns on.
It takes about four hours for your CLIÉ handheld to be fully charged for the first time.
The POWER LED indicator of your CLIÉ handheld turns off when charging is
completed.
Tip
If your CLIÉ handheld is charged frequently, subsequent charges will require less time.
Notes
• If the battery in your CLIÉ handheld is fully discharged, all data stored on the memory
in your CLIÉ handheld will be lost.
• While charging the CLIÉ battery on the cradle, do not connect the line out jacks of
external devices such as a computer to the Headphone jack of your CLIÉ handheld, as
malfunction may occur.
Charging without using the cradle
You can charge your CLIÉ handheld with the plug adapter, without using the
cradle.
Attaching the plug adapter
1
Connect the AC adapter to the DC IN jack of the plug
adapter (1), and then connect the plug adapter to the
interface connector of your CLIÉ handheld (2).
AC adapter
Continued on next page
• • • • • • • • • • • • • • • • • • • • • • • • •
17