Names Of Parts And Functions - Sony PCWA-A320 Quick Start Manual

Names of parts and functions

Wireless Unit
Front
1 STATUS indicator
2 Reset switch
3 LINK/ACT indicator
4 Wireless unit cable
5 Rear cover
6 Wall mounting holes
7 ID
8 MAC address
9 Quick Setup switch
6
Rear
Indicates the status of the Wireless Unit.
Booting: quickly flashes white.
Normal : slowly flashes white
During firmware update : flashes red
During Quick Setup : flashes red
If firmware update fails : continues flashing red after firmware
update (from this state, you must update the firmware again).
Returns the Wireless Unit settings to their factory defaults.
Lights when an Ethernet cable is connected to the NETWORK
connector on the Power Unit.
Connects to the WIRELESS UNIT connector on the Power Unit.
Remove this cover if you want to hang the Wireless Unit to a wall
and to verify the MAC address and Network Name (SSID).
Use these holes to hang the Wireless Unit to the wall.
The six-character hexadecimal unique product ID is printed here.
This ID is used as the default Network Name (SSID) of the Wireless
Unit.
The Wireless Unit MAC address is printed here.
Use this switch to set up the Wireless LAN Converter PCWA-DE30.
Refer to the Quick Start Guide of the Wireless LAN Converter or
Help for details.
(With rear cover removed)
7
8 9