Power Unit
10 100-240 V AC jack
11 WIRELESS UNIT
connector
12 NETWORK connector
Factory default settings
The factory default settings of the Access Point are:
NAME
Network Name (SSID)
Encryption (WEP)
Frequency (Channel)
Broadcast Network Name (SSID)
Access Control
Connection Method
DNS server
Speed
Quick Setup Switch
Time Server (NTP Server)
Connect the supplied power cord here.
Connect the Wireless Unit cable here.
Connect the Wireless Unit to your computer or other device using
an Ethernet cable.
Use a straight-through or crossover Ethernet cable.
DEFAULT SETTING
The six characters printed on the label under
the rear cover of the Access Point
(Wireless Unit)
Disabled
Auto Select
Yes
Accept all
Obtain an IP address automatically (DHCP)
-
Auto-Detect
Enable
-
7