Table of Contents
Advertisement
Precautions
AC adapter
Use ony the supplied AC adapter. Other
AC adapters may cause a failure in the
Access Point.
Safety
Do not drop the Access Point. Careful
handling will help prevent damage.
Installation
Do not place the Access Point where it
will be exposed to the following
conditions:
• Unstable surfaces.
• High humidity or poor ventilation.
• Excessive dust.
• Direct sunlight or extreme heat.
• Closed cars.
• Magnetized locations (near magnets,
speakers, or televisions).
• Locations exposed to frequent
vibration.
• Locations where the transmission of
radio waves may be obstructed by metal
plates or concrete walls
26
Operation
Exposure to cold-to-hot temperature
extremes or very damp environments may
cause moisture to condense on internal
parts. This may prevent the Access Point
from operating properly.
If this should happen, unplug the AC
adapter from the power outlet and let the
Access Point sit for two to three hours or
until the moisture evaporates.
Cleaning
Clean the casing with a soft cloth, lightly
moistened with water or a mild detergent
solution. Do not use any type of abrasive
pad, scouring powder or solvent such as
alcohol or benzene. This may damage the
finish of the casing.
Advertisement
Table of Contents
