Sony DMX-WL1 Startup Manual page 7

Place the IR Blaster
near the IR receiver
of the equipment.
Place the IR Blaster
near the IR receiver
of the equipment.
VCR/DVD/Blu-ray Disc/
Satellite receiver/
Cable box
VCR/DVD/Blu-ray Disc/
Satellite receiver/
Cable box
Home Theater System
DVD
Blu-ray Disc
Cable box
VCR
Connecting to the
AC power outlet
When you finish connecting the equipment
to the transmitter unit, connect the AC
power adapter to the wall outlet.
Transmitter unit
AC power adapter
• Set the output resolution of the equipment to
480i, 480p, 720p or 1080i.
If you currently use equipment connected
directly to your TV with 1080p resolution,
make sure to change the equipment's
resolution to 1080i or less before connecting
it to the transmitter unit.
You should connect the equipment directly
to the TV to change the resolution.
DC IN 9V
to wall outlet
AC power cord
7