Sony PCWA-C150S Operating Instructions Manual page 38

9
38
3. In the field "Key 1", "Key 2", "Key 3", or "Key 4", type the
encryption key set at the Access Point.
Notes
• Type the number of characters or digits as indicated below.
Access Point is encrypted
with a 128-bit WEP
Access Point is encrypted
with a 64-bit WEP
• Alphanumeric characters are case sensitive.
• Alphanumeric characters may include symbols.
4. Select the field where you have input the key from the
"Encrypt data with" drop-down list.
Click "Next".
The Power Management window shown below appears.
Alphanumeric Characters
13 characters
5 characters
Hexadecimal
26 digits
10 digits