Sony Aibo ERS-7M2 User Manual page 11

Use the following procedure to confirm whether or not you are using a DHCP server
in your network environment
(This procedure is for the Windows
1 Click "Start" t "Control Panel".
2 Click "Network and Internet Connections"
3 Right-click either "Wireless Network Connection" or "Local Area Connection", and select "Properties".
4 On the "General" tab, select "Internet Protocol (TCP/IP)" under "This connection uses the following items".
Click "Properties".
5 Confirm your settings.
If "Obtain an IP address automatically" is selected
The DHCP server function is in use.
Proceed to page 12.
If "Use the following IP address" is selected
You are not using a DHCP server.
Proceed to page 13.
c In this case, use the following steps to manually assign your AIBO
Make a note of your PC's IP address displayed under "Use the following IP address". Choose an IP address
for your AIBO robot that does not conflict with this.
E.g. Your PC's IP address: 192.168.0.10
Your AIBO robot's IP address: 192.168.0.11, etc. (anything other than 192.168.0.10)
t
®
XP operating system only. If using another
"Network Connections".
t
, consult its Help.)
operating system
®
Entertainment Robot an IP address.
11