Virtualization Support - Dell Latitude 7200 2-in-1 Setup And Specifications Manual

Option
Numlock Enable
Fn Lock Options
Fastboot
Extended BIOS POST Time
Full Screen Logo
Warnings and Errors

Virtualization support

Table 33. Virtualization Support
Option
Virtualization
VT for Direct I/O
32 System setup
Description
Allows you to enable or disable the Numlock function when the system boots.
• Enable Numlock—enabled by default
Allows you to let hot key combinations Fn + Esc toggle the primary behavior of F1–F12, between their
standard and secondary functions. If you disable this option, you cannot toggle dynamically the primary
behavior of these keys. By default, the Fn Lock option is enabled.
Select one of the following options:
• Lock Mode Disable/Standard
• Lock Mode Enable/Secondary—enabled by default
Allows you to speed up the boot process by bypassing some of the compatibility steps.
Select one of the following options:
• Minimal—enabled by default
• Thorough
• Auto
Allows you to create an additional preboot delay.
Select one of the following options:
• 0 seconds—enabled by default
• 5 seconds
• 10 seconds
Allows you to display full screen logo, when your image matches screen resolution. By default, the Enable
Full Screen Logo option is disabled.
Allows you to select different options to either stop, prompt and wait for user input, continue when
warnings are detected but pause on errors, or continue when either warnings or errors are detected during
the POST process.
Select one of the following options:
• Prompt on Warnings and Errors—enabled by default
• Continue on Warnings
• Continue on Warnings and Errors
Description
This option specifies whether a Virtual Machine Monitor (VMM) can use the additional hardware
capabilities that are provided by the Intel Virtualization technology. By default, the Enable Intel
Virtualization Technology option is enabled.
Enables or disables the Virtual Machine Monitor (VMM) from using the additional hardware capabilities
that are provided by the Intel Virtualization technology for direct I/O. By default, the Enable VT for
Direct I/O option is enabled.