Table of Contents
Advertisement
Operations Manual
whatever you type must appear to the textbox as long as
you have a loop back on the COM port of your card!
I.2 Using Decision Terminal
To test the card using the Decision Terminal. Please do the
following steps:
1.
Install the software using the Decision Studio (It is inside
the CD AutoOpen program).
2.
Run the program (Decision Terminal) at the program menu
of the start menu.
3.
Setup the COM port properties by selecting the setup
option on the File menu.
4.
You can now begin to type any message to transmit
textbox. Take note that whatever you type must appear to
receive textbox as long as you have a loop back on the
COM port of your card.
5.
You can also click the Test button to test your card
automatically.
42
DECISION Computer International
PCCOM PCI 8 port universal RS232 card
Advertisement
Table of Contents
