The Timer; Setting The Clock - Sony ZS-X7 Primary Operating Instructions Manual

The Timer

Setting the clock

"– –:– –" indication appears in the
display until you set the clock.
Tip
The time display
system:
12-hour system
AM 12:00 = midnight
PM 12:00 = noon
DISPLAY
ENT MEM
Before you set the clock, connect the power source (see
page 23).
1
Press CLOCK for 2 seconds until the hour digit
flashes.
2
Press TUNING•TIME SET + or – until you set the
current hour. Then press DISPLAY•ENT MEM.
The minute digits flash. Set the minutes by
pressing TUNING•TIME SET + or – until the
correct minute is displayed.
3
Press DISPLAY•ENT MEM.
The clock starts from 00 seconds.
TUNING
TIME SET
–, +
CLOCK
,
The Timer
17