Using The Flash; Adjusting The Brightness; Choosing A Shot Mode - LG KF750 User Manual

Camera

Using the flash

The flash is set to off as default, but
there are other options.
1
Select
of the viewfinder to enter the flash
sub-menu.
2
There are three flash options:
On - Your camera will always flash
when taking a picture.
Auto - Your camera will assess
whether or not the flash is necessary
for a good picture.
Off - The camera will never flash.
This is useful if you want to save
battery power.
Select the flash option you'd like
to use.
3
When you've made your selection
the flash menu will automatically
close, ready for you to take your
picture, and the flash icon in the
viewfinder will change according to
your chosen flash mode.
NOTE: Whenever you exit the camera,
the flash setting will revert to off
mode. You'll need to switch the flash
back on if you still need it when you
reopen the camera.
3
LG KF750 | User Guide
from the top right corner

Adjusting the brightness

Contrast defines the difference
between light and dark in an image. A
low contrast image will appear foggy,
whereas a high contrast image will
appear much sharper.
1 Select Brightness in Settings.
2
Slide the contrast indicator along
the bar, towards
contrast, hazier image or towards
for a higher contrast, sharper
image.

Choosing a shot mode

1 Select Settings to view the
available shot modes.
2
Choose from the four options:
Normal - This is the default shot
type. The photo will be taken in the
normal way, as outlined in Taking a
quick photo on page 33.
Continuous shot - This enables you
to take nine shots automatically in
very quick succession. See Using
continuous shot mode below for
details.
Frame shot - Choose from one
of the fun frames to transform
your friend into a pirate or just to
for a lower