Sony Walkman 4-185-044-11(1) Operation Manual page 64



Troubleshooting
Other
There is no beep sound when the player is operated.
 [Beep] is set to [Beep OFF].
 Set [Beep] to [Beep ON] (  p. 46).
The player gets warm.
 The player may be warm when the battery is being charged and just after charging.
The player also may become warm when a large amount of files are transferred.
This is normal and is not cause for concern. Set the player aside for a while to allow
it to cool down.
The date and time have been reset.
 If you left the player for a while with the battery used up, the date and time may be
reset.
 This is not a malfunction. Charge the battery until
(  p. 14) and set the date and time again (  p. 17, 45).
All settings of the player have been reset.
 You moved, deleted, or renamed the system files. Or, the memory of the player was
formatted using other than the [Format] menu of the player.
 If you do any of the above operations, the system will be restructured and all
settings of the player will be reset when you disconnect the player from the
computer or other devices.
If the player does not function normally after you format the player using other
than the [Format] menu of the player, format the memory using the [Format]
menu of the player (  p. 51).
appears on the screen