Recording A Stereo/Sap Program; Unrecordable Pictures; Timer Recording (Tv Guide/Manual); Recording With The Tv Guide On Screen System (Tv Guide) - Sony RDR-HX715 Operating Instructions Manual

Recording a stereo/SAP program

The recorder can receive and record stereo/SAP
programs.
Stereo programs
If there is noise in the stereo program, set "Auto
Stereo" in "Options" setup to "Off" (page 98). The
sound will be recorded in monaural but with less
noise.
SAP (Second Audio Program)
When a SAP (Second Audio Program) is received,
the "SAP" indicator lights up on the front panel
display. To record only SAP sound, set "Tuner
Audio" in "Options" setup to "SAP" (page 98).

Unrecordable pictures

Pictures with copy protection cannot be recorded
on this recorder.
When the recorder receives a copy guard signal,
the recorder continues to record but only a blank,
grey colored screen will be recorded.
Copy control
signals
Copy-Free
Copy-Once
Copy-Never
* The recorded disc can be played only on CPRM
compatible equipment (page 10).
50
Recordable discs
+
RW - RW
HDD
VR
+ -
- RW R R
Video
HDD
(CPRM*)
- RW
VR
None (a blank screen is
recorded)
Timer Recording (TV GUIDE/
Manual)
+
HDD RW - RW
VR
There are two methods to set the timer – setting
the timer using the TV Guide On Screen system
and setting the timer manually.
b
Notes
• When the recorder is connected to a cable box and you
want to record using the TV Guide On Screen system,
do the following: Turn on the cable box, connect the set
top box controller, and set "Set Top Box Control" in the
"Settings" setup to "On."
• Do not operate your cable box or satellite receiver just
before or during a timer recording. This may prevent
the accurate recording of a program.
Recording with the TV Guide On
Screen system (TV GUIDE)
You can use the TV Guide On Screen system to set
the timer to record a program up to eight days in
advance.
1
4
7
z REC
+ -
- RW R R
Video
2 3
5 6
8 9
0
TV GUIDE
MENU
</M/m/,,
ENTER
x REC STOP