Other Operations - Aiwa PAVIT AZ-ES1 Operating Instructions Manual

Other operations

To
Go to the beginning of the next track
Go to the beginning of the current track
Go to the beginning of previous tracks
Go to the beginning of succeeding tracks
Adjust the volume
Stop playback
Turn off the power
*1 A short beep sounds for each track. When the first track is reached, the player emits a different beep sound.
*2 While holding down the button, a short beep sounds for each track. When the first track is reached, the
player emits a different beep sound and playback of the first track will start.
*3 The power is automatically turned off if the player is not operated for about 10 seconds while playback is
stopped.
If playback does not start
Make sure that the HOLD/BEEP switch is slid in the direction opposite to the arrow (see page
15).
To remove the "pavit"
Always turn off the power before you remove the "pavit." The audio data or the "pavit" itself
might be destructed if you remove the "pavit" with the player's power turned on.
Tip
Playback starts from the position where it was last stopped.
To start playback from the first track, press . or > repeatedly, or press and hold . or > to return
to the first track.
Playback will also start from the first track when:
– you remove the "pavit" and insert a different "pavit."
– you reset the player.
12
– +
VOLUME / Nx ./>
Do this
Press >.* 1
Press ..
Press . repeatedly.*
To quickly locate the desired track, press and hold
. until you find it.*
Press > repeatedly.*
To quickly locate the desired track, press and hold
> until you find it.*
Press VOLUME –/+.
Press and hold VOLUME –/+ to quickly turn up or
down the volume.
Press Nx.* 3
Press and hold Nx.
1
2
1
2