Table of Contents
Advertisement
Decreasing of preset temperature can be set
separately for all days of the week.
In the example above, on Tuesday, the
preset temperature for the heating circuit is
reduced by 10°C between 6:00 and 7:30 and
15:30 to 19:00. In other ranges, the preset
temperature will not be lowered.
•
switch on or off for heat pump circuits.
•
working in schedule or fixed value for
solar regulator.
10.8
Fuel consumption
In the Fuel consumption tab user can read
the fuel consumption in kilograms in a daily
cycle (every 1 hour) or a monthly cycle
(every 1 day).
10.9
Device settings
The Device settings tab enables to:
•
change the regulator installation address,
•
reading basic Wi-Fi network parameters,
•
readout
a
software
regulator module and additional modules
or panels,
•
update internal ecoNET300 software.
The ecoNET24 server periodically checks
availability of new software version for the
version
in
the
15
ecoNET300 module. It displays information
concerning a new software version. All the
user needs to do is to press Update button.
Software update process can be shorter or
longer depending on the speed of Internet
connection. Do not disconnect the device
from a power supply during update process
because it will cause its damage.
In the Settings tab in local version, user
can:
•
read
the
IP
address
Ethernet or Wi-Fi network,
•
read the Wi-Fi signal strength and the
quality of his signal,
•
display
information
server, its status and availability. After
pressing
Check
button, user can check if the external
server is available from a level of Internet
browser (excluding ecoNET300 Internet
module),
•
read
information
controller:
identifier,
software version in controller module,
additional modules and panels,
•
update software to ecoNET300 module,
•
change
login
password.
When changing Wi-Fi network, click Refresh,
select Network name, and used Type of
security (e.g. WPA2 Personal) and enter
Password to a selected network.
All modifications must be confirmed by Save
button.
11. Mobile application
The Android and iOS mobile application
allows remote access via smartphone, tablet
only
to
controllers
ecoNET300 internet module. The application
uses an Internet connection and a user
account
on
the
website.
The applications works only with ecoNET24
server, so should be need to sign up for an
ecoNET account to use them.
and
status
about
ecoNET24
server
availability
concerning
selected
UID
number,
parameters:
login
equipped
with
www.econet24.com
of
and
the
Hide quick links:
Advertisement
Table of Contents
