TP-Link ecoNET300 Operation And Installation Manual page 10

WPS/RESET button. Deleting user name
and password
settings. User: admin, password: admin.
Works only in local version.
The LED indicators of module operation
condition.
LED
LED
condition
Power
ON
OFF
Connection
with a
ON
regulator
OFF
Connection
ON
with WiFi
OFF
Connection
ON
with a server
OFF
After the power is on, ecoNET300 requires
app. 1 minute in
operational system. Then, the module begins
to work and indicates its condition with LED
indicators. In a
ecoNET300 module with a regulator is active,
and restoring default
Module operation
condition
Power on.
Power off.
Active connection of the
regulator.
No connection with
regulator.
Connection to
programmed wireless
network is on.
No connection with
wireless network.
Connection with
www.econet24.com
external server is on.
No connection for
www.econet24.com
external server.
order to load the
connection between
a " connection with controller" indicator
lights up.
ecoNET300 module are added to the main
menu.
MENU → Information → ecoNET WiFi
MENU → Information → ecoNET Ethernet
MENU → Main settings → WiFi
The ecoNET300 requires active DHCP server
of Access
manual IP
internet module is not supported. More
information can be obtained from router
configuration
administrator.
In case of connection with a chosen Access
Point via wireless network, user has to know
the settings of Wi-Fi network which the
module will be connected to: network name
(SSID), protection type, access password.
In case of connection with LAN wire network,
a ecoNET Ethernet tab will be available in
regulator menu from which the IP number,
mask and
ecoNET24 server connection condition can be
checked. It is required to save the displayed
IP number
number in a form of: http://10.1.2.237 is
entered into the address field from the level
a
of LAN network. A website to operate the
regulator menu will be activated.
It is necessary to enter network parameters
in General settings menu of the control
panel in order to make a wireless connection
via Wi-Fi.
To do this, select:
MENU → general settings → WiFi (WiFi
settings)
Select SSID in Network Settings. It is a
name of the local wireless network which has
to be the same for all devices working in this
network (SSID can be, e.g.: myWiFi).
10
New functions for
Point (e.g. router)
assignment for
software or
gate can be read
(e.g. IP:10.1.2.237).
managing
because
ecoNET300
network
out and
This