Page 1
Operating Manual GenerLink ™ 225 Arnold Road www.generlink.com Lawrenceville, GA 30044 MA23-N (unit without whole house surge suppression) www.generlink.com MA23-S (unit with whole house surge suppression) MA24-N (unit without whole house surge suppression) OPER-MA23/24-N/S 5.1.19 MA24-S (unit with whole house surge suppression)
Page 2
Global Power Products. If any unit provided by Global Power Products does not Installation Date: your local electric utility (“Utility”). As a user of GenerLink™, you further agree to follow the comply with any of the expressed warranties set forth above and customer provides Global Power Watt: A unit that measures the amount of electrical power.
Overload: A condition that occurs when the load is greater than the The maximum load of electricity that equipment can carry. system/device is designed to handle. Verify that the green status light on the GenerLink unit is illuminated. ■ Circuit: A continuous loop of current.
WARNING 1. Call for service. (Refer to the Terms and Conditions for service instructions) 2. Do not attempt to test or use the GenerLink with a generator until the If the green status light is NOT illuminated when condition is corrected.
14-50. Consult with your local utility or a GenerLink Authorized Reseller tor from GenerLink. If the red light is illuminated at any time or in conjunc- to determine if your generator can be used to connect with GenerLink.
Page 6
GenerLink unit when the power transition occurs. This is a simple Operating Altitude: Sea Level to 12,000 feet GenerLink is installed outside your home at the electric meter in less than unique connector that allows for quick and ■ ■...
(Watts) cord length, follow these easy steps: GenerLink Specifications and Technical Information To determine if your GenerLink unit is equipped with surge protection, check the product label on the collar of the device for the model number MA23/24-S. Load Start Run Watts = Load STEP 1.
When selecting a ances you want to operate and add the starting wattages together to determine Do not connect the GenerLok power cord to GenerLink if the red fault portable generator to connect to your house, you should ensure the ■...
Home Security System 30-amps and/or 50-amps. GenerLink is designed to be compatible with 20- Lights 40-150 amp, 30-amp and 50-amp connectors. GenerLink is not rated to be compatible Range w/Oven 12200 with larger current outputs and will electronically disconnect if you are...
Page 10
When selecting a ances you want to operate and add the starting wattages together to determine Do not connect the GenerLok power cord to GenerLink if the red fault portable generator to connect to your house, you should ensure the ■...
Page 11
(Watts) cord length, follow these easy steps: GenerLink Specifications and Technical Information To determine if your GenerLink unit is equipped with surge protection, check the product label on the collar of the device for the model number MA23/24-S. Load Start Run Watts = Load STEP 1.
Page 12
GenerLink unit when the power transition occurs. This is a simple Operating Altitude: Sea Level to 12,000 feet GenerLink is installed outside your home at the electric meter in less than unique connector that allows for quick and ■ ■...
Page 13
14-50. Consult with your local utility or a GenerLink Authorized Reseller tor from GenerLink. If the red light is illuminated at any time or in conjunc- to determine if your generator can be used to connect with GenerLink.
WARNING 1. Call for service. (Refer to the Terms and Conditions for service instructions) 2. Do not attempt to test or use the GenerLink with a generator until the If the green status light is NOT illuminated when condition is corrected.
Overload: A condition that occurs when the load is greater than the The maximum load of electricity that equipment can carry. system/device is designed to handle. Verify that the green status light on the GenerLink unit is illuminated. ■ Circuit: A continuous loop of current.
Page 16
Global Power Products. If any unit provided by Global Power Products does not Installation Date: your local electric utility (“Utility”). As a user of GenerLink™, you further agree to follow the comply with any of the expressed warranties set forth above and customer provides Global Power Watt: A unit that measures the amount of electrical power.
Need help?
Do you have a question about the MA23-N and is the answer not in the manual?
Questions and answers
How do you remove meter enclosure cover from unit?
The context does not provide information on how to remove the meter enclosure cover from the GenerLink MA23-N.
This answer is automatically generated