Troubleshooting - Dual WCP165GH Installation & Owner's Manual

Problem
Unit will not turn on
(no power)
Unit has power
(but no sound)
Unit blows fuses
NO FILE appears
on display
NO SUPPORT appears
on display

Troubleshooting

Cause
Yellow wire not connected or incorrect
voltage Red wire not connected or
incorrect voltage
Black wire not connected
Fuse blown
Speaker wires not connected
One or more speaker wires touching
each other or touching chassis ground
Yellow or red wire touching chassis
ground
Speaker wires touching chassis ground
Incorrect fuse rating
Selected file is not available in direct or
alphanumeric search modes
An invalid ID3 tag version is present
An ID3 tag character is not supported
WCP165GH OPERATION
Check connections for proper
Check connection to ground
Check connections at speakers
Insulate all bare speaker wires
from each other and chassis
Use fuse with correct rating
Version 1.0 to 2.4 ID3 tags are
Action
voltage (11~16VDC)
Replace fuse
ground
Check for pinched wire
Check for pinched wire
Repeat search using valid
parameters
supported.
Only ASCII characters are
supported.
15