Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Hakko Electronics 494
Summary of Contents for Hakko Electronics 494
- Page 2 1. PACKING LIST Before using the set, please check the contents to be sure that all items are included. Station ............. 1 Main filter ............5 Filter case ............1 Inlet socket ............1 Filter cap ............1 Exhaust duct/5 m (16.4 ft.) ......1 Pre-filter ............
-
Page 3: Table Of Contents
20 m (65.6 ft.) in length on the beginning any maintenance. A single HAKKO 494 unit can suction side and 5 m (16.4 ft.) in handle up to 10 soldering irons. length on the exhaust side. -
Page 4: Filter Cap
4. PART NAMES, ASSEMBLY PROCEDURE Pipe for Main Filter Insert main filter and connect inlet socket. Grounding Terminal Fuse Holder ( Internal fuse: 125 V, 5 A) Power Switch Suppressor Exhaust Duct Inlet Socket Used to suppress the 5 m (16.4 ft.) exhaust sounds during use. -
Page 5: Pre-Filter
(Refer to page 5.) Hose coupling band Binds silicone hose and power cord together. Nylon strap To the absorber Absorption pipe HAKKO 494 Silicone hose Soldering iron (Not included) Filter cap Pre-filter Nylon strap Placed inside the filter case. - Page 8 Maintenance of the duct set Suction performance drops as flux builds Filter cap up in the pre-filter and filter cap. Perform maintenance following the instructions below. l Replace the pre-filter Pre-filter Replace the pre-filter when it turns yellow from flux bleeding into it. l Remove the filter cap and pull out the pre- filter.
- Page 9 7. PARTS LIST l Absorption pipe set ➂ ➁ ➃ ➀ *Illustration for absorption pipe set A (No. C1029) l No. C1034 [Absorption Pipe Set F/455] Item No. Part No. Part Name Description Item No. Part No. Part Name Description B1281 Absorption pipe B 6.5 ×...
- Page 10 Hexagon socket head cap screw M6 × 40 (4) Plain washer (12) Spring washer M6 (4) Pan head screw with washer Hexagon socket (with spring washer) set screw M4 × 10, chromate (4) M5 × 12 (2) Truss screw Hexagon socket M4 ×...
-
Page 11: B1239 Timing Belt
Item No. Part No. Part Name Description B1221 Motor 100 V, with capacitor B1315 Motor 110 V, 120 V, with capacitor B1316 Motor 220 V, with capacitor B1317 Motor 230 V, 240 V, with capacitor B1234 Base plate B1231 Base plate securing stay with vibration proof rubber (A) B1232 Pulley/prime mover side with hexagon socket set screws (M5 x 12) x 2 B1233 Pulley/follower side with hexagon socket set screws (M4 x 6) x 2...
Need help?
Do you have a question about the 494 and is the answer not in the manual?
Questions and answers