Gamma First Set Junior Net 18’ Manual

PACKAGE CONTENTS

1 - Leg Base Assembly
5 - Base Spreader Tubes
1 - Center Spreader Tube
2 - Net Posts
1 - 18' x 33" Net
Center Spreader Tube

ASSEMBLING THE JUNIOR NET FRAME

Step 1: Position the Leg Base Assemblies on the ground approximately 18' apart as shown above.
Step 2: Insert the tapered (male) end of 1 Base Spreader Tube (male / female) into a Leg Base Assembly. Insert 2 more Base Spreader
Tubes, each into the previous Base Spreader Tube as shown above.
Step 3: Insert a Center Spreader Tube (male / male).
Step 3: Insert the male end of the Center Spreader Tube into the female end of 1 Base Spreader Tube. Next, insert 1 Base Spreader
Tube.
Step 4: Insert the male end of the final Base Spreader Tube from Step 3 into the Leg Base Assembly as shown above.
Step 5: Insert the Net Post into the top of each Leg Base Assembly.
Made in Taiwan
GAMMA | 200 Waterfront Drive | Pittsburgh, PA 15222-4750 | O: 412.323.0335 | F: 412.323.0317 | GAMMASports.com | Facebook/Twitter: GAMMATennis
(male / male)
Base Spreader Tube
(male / female)
First Set Junior Net 18'
®
Net Post
Leg Base Assembly
Updated 03.22.12