Midea MFGA-55FN1RD0 Owner's Manual page 10

The following displays indicate an error or problem:dealer.
Table 5-2
Display
Number
code
Communication between indoor and outdoor units
1 E1
failure
Temperature sensor is off or short-circuit
E2 E3 E4
2
E5 E6
Outdoor unit protection or malfunction
3
The temperature of indoor unit evaporator is too low
P0 or too high,and a compressor protection feature is
4
automatically activated.
P9
5
Anti-cold air function happens/Defrosting starts.
show on the LCD of the indoor unit when the unit is in the normal operation.The three icons
imply the three function respectively.
The icon implies the remote control function.
implies the defrosting function.
The icon
The icon implies the forced cooling function.
If the supply cord of this appliance is damaged, replacement work shall be performed by authorized personnel only.
For the unit adopts PTC, the PTC heating device is fixed in the middle of bottom plate of the cabinet. Do not attempt to remove
or repair these components by yourself, it may cause a fire or other danger.
owner's manual
8
Problems
CAUTION
What to do
Contact service people
Contact service people
Contact service people
Turn off the unit, clean the air filter,then restart the unit.
If this operation does not work,please contact service
people.
When the temperature is warm enough, the function stops
automatically. The unit will auto restart after finishing the
defrosting and the temperature of indoor Heat Exchanger
raises.