Panasonic VariCam LT White Paper page 18

VariCam LT Ready for Live White Paper
6.3.2 VariCam LT Settings
Tally lights the Tally lamps on the VariCam LT VF (VCVF10). The Tally signal can be accessed via the DC OUT/RS terminals.
REC Tally settings can be made on the VariCam. It is recommended to make them so as not to interfere with
external inputs.
MENU→OUTPUT SETTINGS→VF SDI INDICATOR→REC TALLY: This can be used to switch the recording status
display mode.
RED: The red Tally lamp is lit
GREEN: The green Tally lamp is lit
CHAR: "REC" is shown in characters in the viewfinder
18