Panasonic VariCam LT White Paper page 17

6.3. Tally Input
6.3.1 ROP Settings
A Tally signal can be sent as input to ROP preview connector pins 3 and 4 (or pins 8 and 9 on the AK-HRP1005GJ).
AK-HRP1000GJ
(8)
(9)
Tally settings are made as follows.
For the AK-HRP1000GJ/1005GJ
Access ROP MENU→SYSTEM CAM to change the settings.
TALLY CONTROL: Set Tally notifications to on or off.
TALLY INPUT: Select the camera number to which Tally notifications are sent.
For the AK-HRP200G
Access Setup Mode to change the settings.
For details, refer to the Annex1 AK-HRP200G "Setup Mode" documentation.
VariCam LT Ready for Live White Paper
AK-HRP1005GJ
AK-HRP200G
17