Page 1
PORTABLE DAB RADIO MENU/ SCAN INFO UNPAIR SOURCE PRESET SELECT MODEL: GMR1990DABT USER MANUAL DC IN AUX IN...
Page 2
Welcome Your DAB Radio 2.0 In The Box 2.4 Top View 2.1 Front View 2.5 Rear View Quick Setup 3.3 Adjusting the Volume 3.0 Connecting the Power 3.1 Standby & Auto Standby 3.4 Switching Modes 3.2 Fitting the Batteries Operation AUX Input Operation DAB Radio Operation 4.30 Aux In Mode...
• Where it is dusty Adjusting the Antenna Fully extend the antenna to ensure good reception in both DAB and FM Radio modes. It may be necessary to alter the position of the GMR1990DABT and/or the antenna to achieve the best signal. GMR1990DABT...
/ SELECT button. Bluetooth Play/ Pause functions. Select when in DAb or FM menu. AUX IN DC IN VOLUME- button. Press to decrease the volume level. button. Press to skip to previous Bluetooth tracks. STANDBY button. Press to wake or enter STANDBY mode. GMR1990DABT...
AUX input. Connect external audio sources with a 3.5mm audio cable (not supplied) MICRO USB power socket. Connect AUX IN DC IN the supplied mains adaptor for mains power. BATTERY compartment. Insert 4 x AA batteries for portable use. GMR1990DABT...
3. When in Bluetooth or AUX mode, once audio playback has ceased and the unit has stood idle for approximately 20 mins, it will switch into a ‘power-down’ power saving mode. 4. To wake the unit up, press the STANDBY button. GMR1990DABT...
Leaking batteries may damage the battery cabinet and the radio as a whole. If you are not going to use the GMR1990DABT radio for an extended period, please remove the batteries to avoid damage. Caution: Danger of explosion if battery is incorrectly replaced.
1. To activate the full scan press and hold the MENU/INFO button. SCAN MODE SELECT 2. When you see the <Full scan> option press the MENU PRESET INFO SELECT button. The unit will search for all available DAB stations that can be tuned. GMR1990DABT...
3. You will see <X: (Empty) > appear on the display (where 'X' Preset Store is the preset location number). Use the buttons to <1: (Empty) > cycle through the preset locations 1-10. 4. Press the /SELECT button to store the station to the selected preset location. GMR1990DABT...
(zero being no errors). • Mode: Displays the current mode. • Power mode: Displays Mains or Battery power • Time & date: The time & date is set automatically from the DAB or FM broadcast. GMR1990DABT...
1. Press and hold the MENU/INFO button in DAB mode; then use the buttons to find <DRC>. Press the SELECT button. 2. Select between DRC off, DRC Low and DRC High using the buttons. 3. Press the /SELECT button to save the setting. GMR1990DABT...
3. You will see <X: (Empty) > appear on the display (where 'X' Preset Store is the preset location number). Use the buttons to <1: (Empty) > cycle through the preset locations 1-10. 4. Press the /SELECT button to store the station to the selected preset location. GMR1990DABT...
• Signal strength: This option will display a bar indicating the signal strength. Power Mode • Power mode: Displays Mains or Battery power Time • Time & date: The time & date is set automatically from the DAB or FM broadcast. Date GMR1990DABT...
3.5mm audio cable (not supplied). 1. Connect one end of the cable to the AUDIO devices headphone /Line output and the other end to the AUX INPUT input on the rear of the GMR1990DABT as shown. AUX IN DC IN 2.
2. If you have not connected a device you can now enable ‘discovery’ mode on your device and select the GMR1990DABT Bluetooth device. If you are asked for a pass code enter ‘0000’. If you turn off either device before pairing is complete the process will need to be repeated when powered ON again.
<System>, press the /SELECT button. 3. Use the buttons to find <Factory reset> and press /SELECT button. Factory Reset? 4. Using the buttons select ‘YES’ and press the <Yes> No /SELECT button to perform the reset function. GMR1990DABT...
Alter the brightness of the backlight when dimmed. 1. Select <Dim Level> using the buttons. Press the Dim level /SELECT button to enter the options. <High > 2. Using the buttons select from LOW or HIGH. 3. Press the /SELECT button to store the setting. GMR1990DABT...
1. Select <Set 12/24 hour> using the buttons. Press Set 12/24 hour /SELECT button to enter the options. <Set 24 hour > 2. Using the buttons choose from SET 12 HOUR or SET 24 HOUR. 3. Press the /SELECT button to store the setting. GMR1990DABT...
Date Format 1. Select <Set date format> using the buttons. Press Set date format /SELECT button to enter the options. <DD-MM-YYYY > 2. Using the buttons choose from DD-MM-YYYY or MM-DD-YYY. 3. Press the /SELECT button to store the setting. GMR1990DABT...
The external audio source volume is too low, increase the volume level. The sound is distorted Reduce the GMR1990DABT volume level using the volume control. The sound is distorted from an AUX input The external audio source volume is too high, decrease the volume level.
3 Ohms DAB/DAB+: 174-240 MHz Frequency Range FM: 87.5-108MHz Max Power Consumption AC 15W Dimensions 165mm (L) x 88mm (W) x 52mm (H) Customer Support Our customer service team is available for technical or guarantee support. Visit www.goodmans.co.uk/support QSG-AUG16-GMR1990DABT www.goodmans.co.uk...