Harman JBL LINK BAR Faq

LINK BAR FAQ
1) How do I perform factory reset on my LINK BAR?
You can reset the LINK BAR via the settings menu. Device Preference -> Reset.
2) What are the sound modes on the LINK BAR?
There are 4 sound modes, you can select in the settings menu: Sound -> EQ mode
a. Standard
b. Movie
c. Music
d. Voice
"Standard" sound mode is the default setting.
3) Does the LINK BAR remote control use Bluetooth or IR connection?
The LINK BAR remote control uses a Bluetooth connection.
4) How do I pair my LINK BAR remote control?
Press and hold both "HOME" and "BACK" buttons on the remote control for 3
1.
seconds. A Green LED light will flash on the remote control to indicate pairing
mode.
2. Press and hold the Bluetooth Button (
3. The LINK BAR remote control will appear in the pairing menu on the right hand
panel. Wait 10s to start the pairing process as indicate on the display.
5) How do I active the microphone on the remote control?
Press the button on the remote control to activate the Google Assistant.
Speak directly into the microphone (no need to say the hotword "OK Google" or "Hey
Google"). The LINK BAR will respond accordingly.
6) Example of voice commands that can work on your LINK BAR
Alarms and Timers
Answers
Calendar
Device Actions and
Settings
) on the LINK BAR.
Set timer for 5 minutes
How many liters in a gallon?
How Tall is Tom Cruise?
When is my next meeting?
turn on Bluetooth
Switch to HDMI 1
return to Android TV home page