Advertisement
Left Panel
Indicator of OutputB's Input source:The corresponding red LED light will illuminate according to
which input you connect.
Indicator of OutputA's input source:The corresponding blue LED light will illuminate according to
which input you connect.
Output A port
Connecting and Operating
1).Connect the HDMI signal sources(Such as PS3,STB etc) into HDMI input.
2).Connect the cables from your displays (monitor or projector) into the HDMI outs of the output A
and output B.
3).Plug the 5VDC power supply into Power input and the unit is ready to use .
4).Use the remote controller or press buttons to select input signal source for output A and output B
Attention:Insert/Extract cable gently.
Please reset power when there is no signal.
MAINTENANCE
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzine to clean this unit.
PRODUCT SERVICE
1) Damage requiring service: The unit should be serviced by quali ed service personnel if:
(a)The DC power supply cord or AC adaptor has been damaged;
(b)Objects or liquids have gotten into the unit;
(c)The unit has been exposed to rain;
(d)The unit does not operate normally or exhibits a marked change in performance;
(e)The unit has been dropped or the cabinet damaged.
2) Servicing Personnel: Do not attempt to service the unit beyond that described in these operating
instructions. Refer all other servicing to authorized servicing personnel.
3) Replacement parts: When parts need replacing ensure the servicer uses parts speci ed by the
manufacturer or parts that have the same characteristics as the original parts. Unauthorized
substitutes may result in re, electric shock, or other hazards.
4) Safety check: After repairs or service, ask the servicer to perform safety checks to con rm that
the unit is in proper working condition.
Rear panel
Power input
Input ports
Output B port
3
Operating Instructions
Right Panel
Advertisement
