Connecting An Audio Device; Handsfree Calling; Making Calls - Sony DSX-S300BTX Operating Instructions Manual

Connecting an audio device

1
Be sure that both this unit and the
audio device are switched to
Bluetooth signal on.
2
Connect to this unit using the audio
device.
" " appears when the connection is made.
Connecting to the audio device last-
connected from this unit
1 Be sure that both this unit and the audio device
are switched to Bluetooth signal on.
2 Press (SOURCE/OFF) repeatedly until
"Bluetooth Audio" appears.
3 Press (PAUSE).
" " flashes while the connection is being
made. " " stays lit when the connection is
made.

Handsfree calling

Once the unit is connected to the cellular phone,
you can make/receive handsfree calls by
operating this unit.

Making calls

Calling from the phonebook
You need to make sure the appropriate
phonebook has been selected. For details on how
to select a phonebook, see "Selecting a
phonebook" (page 34).
1 Press (SOURCE/OFF) repeatedly until
"Bluetooth Phone" appears.
2 Press
(BROWSE).
The phonebook appears.
3 Rotate the multi way encoder to select an
initial from the initial list, then press it.
4 Rotate the multi way encoder to select a name
from the name list, then press it.
5 Rotate the multi way encoder to select a
number from the number list, then press it.
The phone call starts.
32
Calling from the call history
1 Press (SOURCE/OFF) repeatedly until
"Bluetooth Phone" appears.
2 Press and hold (BROWSE) for 2 or more
seconds.
A list of the call history appears.
3 Rotate the multi way encoder to select a name
and phone number from the call history, then
press it.
The phone call starts.
Note
You can call from the call history (up to 20).
Calling by direct phone number input
You can call by direct phone number input using
only the card remote commander.
1 Press (CALL) on the card remote commander
to select the Bluetooth Phone source.
2 Press the number buttons (0-9,
card remote commander to enter the phone
number.
3 Press (ENTER) on the card remote
commander.
The phone call starts.
To input "+," press and hold the 0 button on the
card remote commander.
Calling by preset number
You can store up to 6 contacts in the preset dial.
For details on how to store, see "Preset dial"
(page 34).
1 Press (SOURCE/OFF) repeatedly until
"Bluetooth Phone" appears.
2 Push the multi way encoder up/down to select
the contact you want to call, then press it.
The phone call starts.
To end a call
Press the multi way encoder again, or
(SOURCE/OFF).
Note
Even if the call is ended, the Bluetooth connection is
not canceled.
Calling by redial
1 Press (SOURCE/OFF) repeatedly until
"Bluetooth Phone" appears.
2 Press and hold the multi way encoder for 2 or
more seconds.
The phone call starts.
or ) on the