Standard Mode - Hawke LRF Series Manual

STANDARD MODE

Standard mode measures the straight line
distance to the target you are aiming at.
When there is nothing displayed to the left of
the distance you are in standard mode.
If you hold the ON button while in standard
mode the range finder will continuously scan so
you can move around and get constant updates
of the distance.
BEELINE MODE "BEELINE"
Beeline mode measures the horizontal distance
to a target.
If you hold the ON button while in beeline
mode the range finder will continuously scan so
you can move around and get constant updates of the horizontal distance.
Laser Distance Measured
6