Turning The Photo Frame On - Sony S-Frame DPF-D82 Operating Instructions Manual

• Insert the plug of the AC adaptor firmly, if the
connection is loose, the photo frame may turn off
when it is moved.
• After use, remove the AC adaptor from the
DC IN 12 V jack of the photo frame, and remove
the AC adaptor from the outlet.
• Even if your photo frame is turned off, AC power
(house current) is still supplied to it while connected
to the wall outlet via the AC adaptor.
• Do not turn the photo frame off or disconnect the
AC adaptor from the photo frame before the
standby indicator turns red. Doing so may damage
the photo frame.
Turning the photo frame
on
When the power switch is set to
off
When the power switch is set to on, the standby
indicator turns green and the Sony logo on the
front panel lights up.
When the power switch is set to
on
Press 1 (on/standby) on the photo frame or
remote control to turn on the power. The
standby indicator turns to green from red. The
Sony logo on the front panel lights up.
Continued
GB
19