Fit To Screen Mode; Image Information Mode; Entire Image Mode - Sony S-Frame DPF-D100 Operating Instructions Manual

Notes
• The [Effect] setting in the [Slideshow Settings]
menu is applied only when slideshow is displayed
on the single view mode.
• The [Delete] menu cannot be used during the
slideshow display. If you want to delete images,
switch the display to the single image display.
x Single image display
To display an image you want to display
• During a slideshow, press
you want to display.
• In the index image display, press B/b/v/V to
select an image you want to display and then
press . You can also press
Tip
To perform this operation from the photo frame, press
ENTER at an image you want to display during a
slideshow. In the index image display, press the
direction buttons to select an image and then press
ENTER.
Pressing VIEW MODE changes the modes in
the following order.
Tip
You can set the image display mode except image
information mode with [Display Mode] in the
[Various settings] menu (page 31). Not all images are
able to be [Fit to screen].

Entire image mode

Displays an entire image in the screen. You can
switch the images to display by pressing B/b.

Fit to screen mode

Displays an image over the whole screen.
You can switch the images to display by
pressing B/b.
at an image

Image information mode

Displays image information such as the image
(zoom in).
number, file name, and shooting date. You can
switch the images to display by pressing B/b.
The following information is displayed.
Input/setting indications
1
Input indications and settings information
for an image are displayed.
Icons Meaning
"Memory Stick" input
SD Memory Card input
CompactFlash input
xD-Picture Card input
Internal memory input
Protect indication
Associated file indication
(Displayed when there is an
associated file such as a motion
file or a miniature e-mail image
file.)
Continued
GB
21