Schematic Diagram - Panasonic SA-DK10 Service Manual

13 Schematic Diagram

(All schematic diagrams may be modified at any time with the
development of the new technology)
Note:
S601 : DPL Switch
S602 : SSS Switch
S603 : 3D AI Switch
S604 : Preset EQ Switch
S605 : Amazing Switch
S606 : Super Woofer Switch
S607 : Tape Eject Switch
S610 : Rev Mode select Switch
S611 : Rec/Stop select Switch
S612 : Display/Demo select Switch
S613 : Clock/Timer Switch
S614 : Play/Rec Switch
S615 : Selector Switch
S616 : Tune Mode Switch
S617 : DVD/CD Switch
S618 : Tuner Switch
S619 : Tape Switch
S620 : Volume (-) Switch
S621 : Volume (+) Switch
S622 : Memory Switch
S623 : Power Switch
S625 : CD Manager Switch
S626 : Disc 1 Switch
S627 : Disc 2 Switch
S628 : Disc 3 Switch
S629 : Disc 4 Switch
S630 : Disc 5 Switch
S631 : Cinema Switch
S632 : Open/Close Switch
S971 : Switch Mode
S972 : Switch Half
S973 : Switch CR02
S974 : Switch RECINH_R
S975 : Switch RECINH_F
SW1 : Switch Push
SW2 : Switch Push
SW3 : Switch
SW4 : Switch CD
SW5 : Switch Lock
SW2501 : Switch
VR600 : Volume Jog
• The voltage value and waveforms are the reference voltage
of this unit measured by DC electronic voltmeter (high
impedance) and oscilloscope on the basis of chassis.
Accordingly, there may arise some error in voltage values
and waveforms depending upon the internal impedance of
the tester or the measuring unit.
No mark : Playback << >>
(( )) : CD ( )
• Importance safety notice :
Components identified
characteristics important for safety. Furthermore, special
parts which have purposes of fire-retardant (resistors), high-
quality sound (capacitors), low-noise (resistors), etc. are
used. When replacing any of components, be sure to use
only manufacturer´s specified parts shown in the parts list.
Caution !
IC, LSI and VLSI are sensitive to static electricity.
Secondary trouble can be prevented by taking care during
repair.
• Cover the parts boxes made of plastics with aluminium foil.
• Put a conductive mat on the work table.
• Ground the soldering iron.
• Do not touch the pins of IC, LSI or VLSI with fingers directly.
"CAUTION: REPLACE FUSIBLE RESISTOR WITH THE SAME
TYPE RSFMB40KT-L
REMPLACER LA RESISTANCE FUSIBLE PAR UNE RESISTENCE
FUSIBLE DE MEME TYPE RSFMB40KT-L.
35
: Rec < > : FM
: AM [ ] : AUX
by mark have
FUSIBLE RESISTOR" "ATTENTION:
SA-DK10
special