KitchenAid 5KSB1565 Health & Safety, Use & Care And Installation Manual page 18

TROUBLESHOOTING
Blender stops while blending
All indicator lights are flashing
at the same time.
All indicator lights are flashing alternately.
If the problem cannot be fixed with the steps provided in this section, contact an
authorised service centre (see the "Warranty and service" section).
The Blender may be overloaded. If the
Blender becomes overloaded when
blending heavy ingredients, it will
automatically shut off to avoid damage
to the motor. Press POWER ( ) to reset
the Blender and unplug the power cord.
Remove the pitcher assembly from the
base and divide contents into smaller
batches. Adding liquid to the pitcher may
also reduce the load on the Blender.
The Blender may be jammed. If it is
jammed, the Blender will stop running to
avoid damage to the motor. Press POWER
( ) to reset the Blender and unplug the
power cord. Remove the pitcher assembly
from the base and, with a scraper, free the
blades by breaking up or removing the
contents at the bottom of the pitcher.
TROUBLESHOOTING | 21